| Req ID | Category | Intent | Legal Status | Name | Subdomain(s) | Context | Conditions | Confidence |
|---|---|---|---|---|---|---|---|---|
| #Q001 | prohibition | operational | mandatory | Zero Discharge Requirement | wastewater | These direct dischargers and "new source" indirect dischargers (i.e. facilities that commenced operation after February 26, 1975) must comply with the zero discharge requirement in the regulation. | Applies to facilities producing oil-base paints with solvent-based cleaning operations | high |
| Req ID | Category | Intent | Legal Status | Name | Subdomain(s) | Limit Type | Limit Value | Context | Conditions | Confidence |
|---|---|---|---|---|---|---|---|---|---|---|
| #P001 | operational | operational | mandatory | Zero Discharge Requirement | wastewater | requirement | 0 discharge | These direct dischargers and 'new source' indirect dischargers (i.e. facilities that commenced operation after February 26, 1975) must comply with the zero discharge requirement in the regulation. | Applies to facilities producing oil-base paints with solvent-based cleaning operations (direct dischargers and new source indirect dischargers). | high |
| #P002 | physical | operational | guideline | Porcelain enamel bonding temperature | other | requirement | > 500 °C | Vitreous inorganic coatings are applied to the metal and are bonded to the base metal at temperatures in excess of 500 °C (over 1000 °F). | Stage where enamel frit particles fuse and flow together to form the bonded coating. | high |
| #P003 | physical | operational | guideline | Porcelain enamel bonding temperature (Celsius) | other | requirement | > 500 °C | Vitreous inorganic coatings are applied to the metal and are bonded to the base metal at temperatures in excess of 500 °C. | Standard process step for bonding porcelain enamel to base metal. | high |
| #P004 | physical | operational | guideline | Porcelain enamel bonding temperature (Fahrenheit) | other | requirement | > 1000 °F | Vitreous inorganic coatings are applied to the metal and are bonded to the base metal at temperatures over 1000 °F. | Standard process step for bonding porcelain enamel to base metal. | high |
| Req ID | Category | Name | Context | Confidence |
|---|---|---|---|---|
| #D001 | National Estuary Program (NEP) | non-regulatory program that improves the waters, habitats and living resources of 28 estuaries across the country | high | |
| #D002 | Comprehensive Conservation and Management Plan (CCMP) | long-term plan (referred to as a Comprehensive Conservation and Management Plan (CCMP)) based on local priorities to guide their efforts | high | |
| #D003 | Management Conference (MC) | consists of diverse stakeholders and uses a collaborative, consensus-building approach to implement the CCMP | high | |
| #D004 | Clean Water Act (CWA) | Clean Water Act | high | |
| #D005 | Study area | geographic boundary within which the plan is focused and actions are implemented under Section 320 of the Clean Water Act | high | |
| #D006 | National Estuary Program (NEP) | EPA place-based program to protect and restore the water quality and ecological integrity of estuaries of national significance | high | |
| #D007 | Comprehensive Conservation and Management Plan (CCMP) | long-term plans that contain sustained actions to protect and restore water quality and living resources | high |