| Req ID | Category | Intent | Legal Status | Name | Subdomain(s) | Context | Conditions | Confidence |
|---|---|---|---|---|---|---|---|---|
| #Q001 | corrective_action | health | mandatory | Bacteriological Exceedance Corrective Action | drinking water | When a bacteriological sample indicates the presence of coliform bacteria, corrective action including additional monitoring is required. | When a bacteriological sample indicates the presence of coliform bacteria | high |
| #Q002 | reporting | reporting | mandatory | Bacteriological Resample Identification | drinking water | Re-samples taken under these provisions must be identified on the Provincial Public Health Laboratory's Request for Microbiological Analysis of Water (requisition) form as RESAMPLE's. | When taking re-samples for failed bacteriological results | high |
| #Q003 | reporting | reporting | mandatory | Resample Requisition ID Notation | drinking water | The original requisition form ID number (PPHL ID) and the Alberta Environment and Protected Areas Reference number (AENV ID) must be noted on the requisition using a specific label. | When submitting a requisition form for a bacteriological re-sample | high |
| #Q004 | administrative | reporting | recommended | Resample Label Specifications | drinking water | The label should be: * neon yellow * 2 5/8" x 1" * 30 per page (3 columns of 10 rows) | When creating specific labels to note PPHL ID and AENV ID on resample requisitions | high |
| Req ID | Category | Intent | Legal Status | Name | Subdomain(s) | Limit Type | Limit Value | Context | Conditions | Confidence |
|---|---|---|---|---|---|---|---|---|---|---|
| #P001 | operational | reporting | recommended | Label dimensions | drinking water | requirement | 2 5/8 x 1 inches | Re-samples taken under these provisions must be identified on the Provincial Public Health Laboratory's Request for Microbiological Analysis of Water (requisition) form as RESAMPLE's... The label should be: neon yellow, 2 5/8" x 1", 30 per page | When a bacteriological sample indicates the presence of coliform bacteria, requiring a re-sample. | medium |
| #P002 | operational | reporting | recommended | Labels per page | drinking water | requirement | 30 labels | Re-samples taken under these provisions must be identified on the Provincial Public Health Laboratory's Request for Microbiological Analysis of Water (requisition) form as RESAMPLE's... The label should be: neon yellow, 2 5/8" x 1", 30 per page (3 columns of 10 rows) | When a bacteriological sample indicates the presence of coliform bacteria, requiring a re-sample. | medium |
| Req ID | Category | Name | Context | Confidence |
|---|---|---|---|---|
| #D001 | Protection | Protection refers to proactive/preventative measures and emergency response. | high | |
| #D002 | PPHL ID | original requisition form ID number | medium | |
| #D003 | AENV ID | Alberta Environment and Protected Areas Reference number | high | |
| #D004 | Emergency response | Emergency response involves plans and actions to deal with incidents that arise from unforeseen incidents such as equipment failure or extreme weather events. | high | |
| #D005 | Source protection | Source protection is used to control or minimize the potential for introduction of chemicals or contaminants in source waters, including water used as a source of drinking water. | high | |
| #D006 | Drinking water source protection | Drinking water source protection is the equivalent of a watershed management plan that focuses on water quality. | high | |
| #D007 | Proactive measures | Proactive/preventive measures reduce the risk to consumers and reduce the liability to the waterworks system owner. This response anticipates events or situations that may compromise the safety of drinking water. | high | |
| #D008 | Watershed management planning | Watershed management planning is the first barrier in the multi-barrier/source-to-tap approach. | high |